Our On30 layout is 5m x 10m with many sidings and an approx. 45m run on the single main plus branch lines. It is Digitrax DCC operation only.
The O gauge section has about a 30m run on the single main, with a couple of run-arounds and can be switched from DC/Analogue operation to Digitrax DCC operation.
The O gauge section has about a 30m run on the single main, with a couple of run-arounds and can be switched from DC/Analogue operation to Digitrax DCC operation.
Track inspection train visiting the huts
Lumber mill and mine
Another of the mines on this layout
|
One of the mines on the layout
|
The O/ON30 layout is set up as a DCC layout loosely based on the Canungra narrow gauge railway
